Briggs & Stratton Zero Turn Rider Operator'S Manual Download

Page: 17 / 36

Not for

Reproduction

Basic Driving

Figure 4. Forward Travel

Forward

Travel

Figure 5. Reverse Travel

Reverse

Travel

Smooth Travel

The ground speed levers

of the zero turn rider are

responsive.
The BEST method of

handling the ground

speed levers is in three

steps — as shown in

Figure 3.
FIRST place your hands

onto the levers as

shown.
SECOND, to go forward

gradually push the levers

forward with your palms.
THIRD, to speed up,

move the levers farther

forward. To slow down

smoothly, slowly move

the levers toward neu-

tral.

Figure 3. Move Ground

Speed Levers Gradually

Forward Travel Practice

Gradually move both ground speed levers — evenly

FORWARD from neutral. Slow down and repeat.
Straight forward travel takes practice. If necessary, top

speed can be balance-adjusted — see

Speed Balancing

Adjustment

section.

Reverse Travel Practice

LOOK DOWN & BEHIND, then gradually move both

ground speed levers evenly BACK from neutral. Slow

down and repeat.
Practice backing up for several minutes before attempt-

ing to do so near objects. The rider turns as sharply in

reverse as when going forward, and backing up straight

takes practice.

Zero Turn

Driving Practice

The ground speed levers of the zero turn rider are

responsive, and learning to gain a smooth and efficient

control of the rider’s forward, reverse, and turning move-

ments will take some practice.
Spending some time going through the maneuvers shown

and becoming familiar with how the unit accelerates, trav-

els, and steers — before you begin mowing — is abso-

lutely essential to getting the most out of the zero turn

rider.

Locate a smooth, flat area of your lawn

— one with

plenty of room to maneuver. (Clear the area of objects,

people and animals before you begin.) Operate the

unit at mid-engine speed during this practice session

(ALWAYS operate at full engine speed when mowing),

and turn slowly to prevent tire slippage and damage to

your lawn.
We suggest you begin with the Smooth Travel proce-

dure to the right, and then advance through the forward,

reverse, and turning maneuvers.

Summary of Contents for Zero Turn Rider




































Search results

Summary of Contents for Zero Turn Rider

Reviews:

Related manuals for Zero Turn Rider

Brands by name

Popular brands

Briggs & Stratton Zero Turn Rider, Operator'S Manual

Search results

Summary of Contents for Zero Turn Rider

Reviews:

Related manuals for Zero Turn Rider

Brands by name

Popular brands