Not for
Reproduction
13
OPERATING
INSTRUCTIONS
Text
Before Starting
Recommended fuels
•
Use only a mixture of normal unleaded petrol and 2-stroke engine oil. Mix the fuel
mixture as indicated on the fuel mixing table.
•
Start the machine at least 3 metre away from the refuelling site to avoid the possible
risk of fire.
•
Do not smoke whilst refuelling or working with the machine.
•
Do not use the trimmer near inflammable liquids or gases. This could result in an
explosion and/or fire.
•
Pour the correct quantities of petrol and 2-stroke oil into a container. Then shake the
container well.
Check the position & operation of controls to ensure you are
comfortable before you start using the machine. Triggers, starter
cord and grip position should provide smooth operation, balance and
comfort before starting the machine. Check that all screws are securely
fastened and also check all the safety devices.
Always use the shoulder strap when using the machine. Switch off the
engine before you take off the shoulder strap.
Check the machine for the following each time before use:
•
That there are no leaks in the fuel system
•
That the cutting unit and all safety devices are in perfect condition
•
That all screws are securely fastened
Fuel and Oil
NOTE:
Product may need to be reprimed if it has run out of fuel.
Fuel Mixture Table
Petrol (unleaded)
2-stroke oil
5 litre
100 ml (Only for Victa Formula V 2-stroke Oil)
Mixing procedure: 50 parts unleaded petrol to 1 part 2-stroke oil
USE Clean fresh "Regular Unleaded Fuel"
Fuel with up to 10% ethanol can be used
•
Do not use a fuel mixture which has been kept for longer than 90
days, it may damage the unit.
•
Only use containers designed and approved for the purpose to
transport and store fuel.
•
The use of other oils and or ratios will affect the engine lubrication,
which may cause engine damage and void engine manufacturer's
warranty.
•
Victa recommends the use of Victa Formula V 2-stroke oil at 50:1
fuel to oil ratio only.
