Not for
Reproduction
1
Simplicity / Massey Ferguson / Snapper ZTR
5100279
Rev L
1
TABLE OF CONTENTS:
SETUP PROCEDURES
Quick Setup List ................................................................2
Uncrating ............................................................................3
Battery Activation & Installation ......................................3
Rider Assembly .................................................................4
Seat and Safety Switch Assembly ...................................4
Install Ground Speed Control Levers ...............................4
Check Fluid levels .............................................................5
Fill and Check Engine Oil .................................................5
Check Transmission Oil Level .........................................5
Reduce and Check Tire Pressure ....................................6
Torque Mower Blades .......................................................7
Lubrication .........................................................................7
Perform Safety Checks .....................................................8
Functional Tests ...............................................................8
Mower Blade Stopping Check ..........................................8
Seat Switch Connection ...................................................8
Burnish PTO Clutch .........................................................8
Safety Interlock System ...................................................9
ADJUSTMENT PROCEDURES
Seat Adjustments ..............................................................9
Ground Speed Control Lever Adjustment .....................10
Operator Adjustment ......................................................10
Speed Balancing Adjustment .........................................10
Return-To-Neutral & Neutral Adjustment ......................11
Parking Brake Adjustment ..............................................12
Suspension Adjustment .................................................13
PTO Clutch Adjustment ..................................................14
PTO Clutch Adjustment .................................................14
Blade Brake Check ........................................................14
Mower Deck Leveling ......................................................15
Roller Bar Leveling .........................................................16
SERVICE PROCEDURES
Transmission Oil Filter Change .....................................17
Hydraulic Pump Drive Belt Replacement ......................18
Mower Belt Replacement ................................................19
ATTENTION SETUP PERSONNEL:
Sections and items denoted by the Setup symbol
provide the information necessary to fully assemble,
test, and prepare the units described above for
delivery to your customers.
Additional information concerning functional tests,
general adjustment procedures, and the location
of normal lubrication points are included in these
instructions.
The safety warnings provided in this guide and in
the operator’s manual included with the unit contain
important information that must be obeyed when
assembling, setting-up, operating, servicing, trans-
porting, or storing the unit.
These warnings are highlighted by the safety alert triangle sym-
bol shown above, which signifies that an important safety mes-
sage is being provided.
You must read, understand, and follow these warnings and
instructions, and use safe shop and work practices at all
times while working on or around this unit and all other
outdoor power equipment.
Mfg. No. Description
Simplicity
2690449 Champion Zero-Turn Rider with 44” Mower
2690483 Champion Zero-Turn Rider with 44” Mower (AU/NZ)
2690451 B&S Champion Zero-Turn Rider with 50” Mower
2690452 B&S Champion Zero-Turn Rider with 50” Mower (CE)
2690484 B&S Champion Zero-Turn Rider with 50” Mower
(AUS/NZ)
5900705 B&S Champion Zero-Turn Rider with 50” Mower
5900774 B&S Champion Zero-Turn Rider with 52” Mower
5900947 B&S 3000Z Zero-Turn Rider with 52” Mower (CE)
5900927 B&S Champion Zero-Turn Rider with 52” Mower
(ANSI-EXP)
5900961 B&S Champion Zero-Turn Rider with 52” Mower
5901216 B&S Champion Zero-Turn Rider with 50” Mower
5901268 B&S 3000Z Zero-Turn Rider with 52” Mower (CE)
5901269 B&S Champion Zero-Turn Rider with 50” Mower
Massey Ferguson
2690478 Massey Ferguson ZT1844
2690477 Massey Ferguson ZT2050
2690485 Massey Ferguson ZT2050 (CE)
5900728 Massey Ferguson ZT2450
Snapper
5900608 Snapper ZT18441KHC
5900609 Snapper ZT19441KWV
5900610 Snapper ZT20501BV
5901166 Snapper EZT20501BV
5900706 Snapper 400ZB2450
5900735 Snapper 375ZB2050 (CE)
This Dealer Setup Instruction covers the following products:
Dealer Setup
& Adjustment Instructions
Simplicity / Massey Ferguson / Snapper
Champion Zero-Turn Riders & Mowers
