Briggs & Stratton InfoHub 6520, Installation And Operation Instructions Manual

Page: 3 / 36

3
NOTICE FCC Part 15 Information to User
Pursuant to part 15.21 of the FCC Rules, you are cautioned
that changes or modifications not expressly approved by
Briggs and Stratton could void your authority to operate the
device.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
NOTICE IC Information to User
This device complies with Industry Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
NOTICE FCC RF Radiation Exposure Statement to User
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying
RF exposure compliance. This device meets exposure
limits as demonstrated in a RF Exposure Analysis. The
device must be installed such that a minimum separation
distance of 20 cm is maintained between the device and all
persons at all times.
General Information
Equipment Description
This product is intended only for use as an optional
generator-system wireless control source for the owner.
It allows one to set priorities of assigned loads such as
heating, refrigeration systems, and communication systems
that are controlled by the generator. It also provides
generator status information to the InfoHub™ Cloud.
Where To Find Us
You never have to look far to find support and service for
your generator. Consult your Yellow Pages. There are many
authorized service dealers worldwide that provide quality
service. You can also contact Technical Service by phone
at
800-732-2989 between 8:00 AM and 5:00 PM central time
or click on Dealer Locator at www.briggsandstratton.com,
which provides a list of authorized dealers.
Product Specifications
Rated Voltage ............................................................12V DC
Normal Operating Range .....-20°F (-28.8°C) to 104°F (40°C)
Weight .......................................................0.81 lbs. (0.37 kg)
* This device is listed with UL (Underwriters Laboratories).
Please fill out the information below and keep your receipt to
assist in unit identification for future purchase issues.
Model Number _______________
Revision _______________
Serial Number _______________
Date Purchased _______________
Before Installation
Only current licensed electrical professionals should
attempt wireless module installations. Installations must
strictly comply with all applicable codes, industry standards,
laws, and regulations.
In some areas you may need electrical permits for installing
wireless modules. The installer should check local codes
and obtain the necessary permits before installing the
module.
The gateway wireless module warranty is VOID unless the
module is installed by licensed electrical professionals.
Installer Responsibilities
• Read and observe the safety instructions.
• Read and follow the instructions in this installation
and operation manual.
• Installation must strictly comply with all applicable
codes, industry standards, laws, and regulations.
• Allow sufficient room on all sides of the wireless
module for maintenance and servicing.