Not for
Reproduction
18
2. Remove capscrew (a, Figure 33) from spring anchor
assembly. Insert capscrew through snowthrower
bracket (b) and screw into retainer and speed nut (c).
3. Tighten capscrew to increase the amount of lift assist.
b
c
a
Figure 33
Assembly
Install Spring Anchor
For 2012 Models & Previous Years
1. Open the tractor hood. Install the spring anchor (PP,
Figure 31) by sliding it onto the right side of the bumper.
Close tractor hood.
Note:
Groove (
a
) in spring anchor should be down.
PP
a
Figure 31
Install Spring Anchor Assembly
For 2012 Models & Previous Years
1. Hook spring anchor assembly (QQ, Figure 32) into
groove on spring anchor.
For 2012 Models & Previous Years
For 2013 Models & Proceeding Years
Figure 32
