Not
for
Reproduction
Features and Controls
Match the call out letters in Figure 2 to the features and controls listed in the accompanying table.
2
Control Symbols and Meanings
Auger Control Lever - Used to engage and
disengage the auger and impeller.
A
Speed Selector Lever - Allows the operator to
select forward and reverse speeds.
NOTICE
Do not move speed select lever while
Traction Control is engaged. This may result in
severe damage to the drive shaft.
B
Deflector Control - In-Dash - Used to control the
angle of the deflector (up or down).
C
Chute Rotation Crank - In-Dash - Used to rotate
the discharge chute to the left or right.
D
Free Hand™ Feature - After engaging the traction
control (right hand), allows the operator to release
the auger control lever to use other controls.
E
Traction Control Lever - Used to propel
snowthrower forward or reverse. See also
"Free-Hand Feature".
F
Clean-Out Tool - Used to remove snow and
debris from the discharge chute and the auger
housing.
G
Skid Shoes - Used to adjust the ground clearance
of the auger housing.
H
5
