Brigantia 57-DVRS50, User'S Installation, Operation And Maintenance Manual

Page: 21 / 45

57-DVRS50
21
NOTE: Do not remove any components while the appliance is hot.
Install the top of the door so the slots in the
door go over the tabs on the spring clips as
shown to the right. Swing door down making
sure it sits on top of the unit.
CAUTION: Only doors certified with
the appliance shall be used.
Beware the glass does not drop out!!
Pull the bottom spring clip out and
over the tabs on the bottom of the
door and release as shown below.
Install the glass beads directly onto the burner so
they are one layer deep and cover the entire
burner pan. Do not use other media that is not
approved by Archgard.
Glass Bead Installation
BL
AC
K
G
LA
SS
Door Installation