— 7 —
2357.01-2010
ATTENTION!
1. Boat exploitation with board pressure more than nominal
decreases boat service life.
2. Board air chambers are hermetical if they keep own form
during 8 hours. In this case:
– primary pressure has to be nominal;
– input valves openings have to be tightly closed by plugs.
3. Until sailing satisfy oneself that drain openings on a transom
are closed by plugs.
p1
Check before
l a u n c h i n g o f
boat onto the
water that the
valve is closed
by plug.
Open to pour out the bilge water
(! ashore ONLY !)
Open to pour out the water
from the deck
completely straightened). Then fill the forebody compartment with air up
to the rated pressure.
The rated pressure value is 0.15 kgf/cm
2
.
On completion of filling close the valves with bonnets B (rotate them
clockwise), (look before).
Assemble the paddles by entering the removable parts with blades
into the locks until the click. Secure the oars in the holders.
When mounting the outboard engine make sure that it is reliably
fixed to the transom. In addition, take every precaution to avoid
any contacts of the fuel with the boat surfaces.
In order to discharge air from the compartments, open the valves
(by counterclockwise rotation) and switch the valves over into
condition "OPEN", (look before).
