— 12 —
APPENDIX B.
THE ASSEMBLY ORDER OF THE CONSOLE BCF-21.
1.Take off bow part of the seat from the console (see. Fig B1). The
bow seat is fixed by the press-button and the “bur”.
2.Turn off four nuts M8 (with washers and arrester washers) and
take off the upper part of the console body.
3.Install windglass 4 on the upper part of the console body 1
with the help of bolts 5 (M6x40), polyethylene washers 6 and
7, washers 8, arrester washers 9 and nuts 10 (M6) (See
Fig.B2,B3). Tighten all the nuts.
4.Turn the handrail to the vertical position (See Fig.B4).
Align the holes in the handrail bearings 11 (see. Fig.B5) with the
holes in the console body (upper part) 2, fix the handrail 3 from
the inner part with the help of bolts 12 M8x30 (pipe bearing) and
M8x50 (end bearing), washers 15 (8x24) and arrester washers
16. Tighten all three bolts.
5.Put the base part of the console on the deck of the boat. See
the recommendation for console installation (see page 6 of
this manual). Fix the console with the help of bolts 14 (M8x30),
arrester washers 16, washers 15 (8x24) from the complete set.
Tighten all the bolts.
Fig. B1
Attention !
For installation of consoles SPORT, equipped with
steering system, fuel tank and other options, see page 14 of
this manual.
6.Install the upper part of the console 2 on the base part 1. (see.
Fig.B1). Fix the upper part of the console with the help of nuts
M8, washers 8x24, arrester washers (see point.2). Tighten all nuts.
7.Put bow part of the seat 6 on the console. Fix the bow seat by the
press-button and the “bur”.
