— 16 —
Fig. D1
APPENDIX D.
ASSEMBLY AND MOUNTING OF STAINLESS STEEL ARC
.
1. Unscrew 2 bolts M8 with washers (pos.1 Fig.D1) and 4 screw with
washers (pos.2 Fig.D1) from transom platform of your boat.
2. Bore out 4 holes where shear screw (pos.2 Fig.D1) were installed
with drill 7mm diameter for further installation of bolts M6.
3. Assemble arch (Fig.D2) as follows:
3.1 connect terminals of electrical cable (pos.2 Fig.D2a) of left and
right racks of the arch;
3.2 connect left rack of the arch (pos.3 Fig.D2a) wqith right rack of
the arch (pos.4 Fig.D2a);
3.3 align holes in racks with holes in inserts (pos.5 Fig.D2a) so that
the distance between right and left supports of the arch
(pos.6 Fig.D2a) were:
–
for boats F400, F450
–
800mm (Fig.D2b);
–
for boats F500
–
940mm (Fig.D2c);
3.4 fix arch rack via upper platform (pos.7 Fig.D2a) with the
h e l p o f b o l t s M 6 x 4 0 i t h w a s h e r 6 x 1 2 a n d n u t s M 6
(pos.8 Fig.D2a).
(
WARNING!
When inserting bolts make sure not to damage
electrical cable inside arch.)
4.Set the arc onto transom platform. Previously pull the electrical
cable clamps, outgoing from the right rack (Pos.9), (Fig. D4),
through the hole, 12 mm in diameter, in the right stern plate beading.
Fix the arc with the help of two bolts M8x25, two arrester washers
8 (Pos.10), (Fig. D3, D4), four bolts M6x40, four washers 6x24,
four self-locking nuts M6 (Pos.11), (Fig. D3, D4).
2
1
