BridgeComSystems BCM-220, User Manual

Page: 7 / 32

FUSE REPLACEMENT: When replacing the fuse in the DC power cable, be sure to
replace it with a fuse of the same value (15A). Never replace a fuse with one that is
rated with a higher value.
We recommend that you identify the items listed in the following packing list. If you find that all
the items are not present, please contact us.
Item Quantity
BCM-220 Mobile Radio 1
DC Power Cable w/15
A
Fuse 1
Mounting Bracket 1
DTMF Microphone 1
Microphone Hanger (w/screws) 1
Screw Set:
• 5x16 mm self-tapping screw
• Hex-headed screw w/washer
• Spring Washer
• Flat Washer
4
4
4
4
Image 1: Radio Connections and bracket mounting.
Connecting the Microphone:
• Insert the microphone plug into jack on the front panel of
the transceiver. Be sure the tab on the microphone plug
is facing the left hand side.
• Mount the microphone on the microphone hanger where
it will be within easy reach of the user.
•
To remove the microphone plug, press the tab on the
connector while pulling the plug out of the transceiver
jack.
7