•
Changing Scan Hang Time
The Scan Hang Time is the time spent on the scanned channel after a valid call is
received. Make this time long enough to give opportunity to respond to the
scanned call.
1. Make sure the radio is in VFO mode. Press the ‘B’ button on the
control head to access the personality menu. A good beep is emitted.
2. Rotate the SELECT knob until “SCAN HANG - ms” is displayed on the
top line and the current scan hang time is displayed on the bottom
line.
3. Press the SELECT button to be able to change the scan hang time.
4. Rotate the SELECT knob to the desired scan hang time. Once
achieved, press the SELECT knob to go back to the menu. A good
beep is emitted.
5. To exit the personality menu, press the ‘B’ button on the control head
and the radio will revert back to VFO mode. A good beep is emitted.
•
Changing Scan Wait For Signal Time
The Scan wait for Signal Time is the amount of time the radio will wait looking for
valid signal decode after carrier is detected on the scanned channel. When this
timer expires, the radio resumes scan. A recommended value here is 450 ms.
1. Make sure the radio is in VFO mode. Press the ‘B’ button on the
control head to access the personality menu. A good beep is emitted.
2. Rotate the SELECT knob until “SCAN WAIT SIG - ms” is displayed on
the top line and the current scan wait time is displayed on the bottom
line.
3. Press the SELECT button to be able to change the scan wait time.
4. Rotate the SELECT knob to the desired scan wait time. Once achieved,
press the SELECT knob to go back to the menu. A good beep is
emitted.
5. To exit the personality menu, press the ‘B’ button on the control head
and the radio will revert back to VFO mode. A good beep is emitted.
25
Summary of Contents for BCM-220
Page 1: ...BCM 220 User Manual By BridgeCom Systems Inc...
Page 27: ...APPENDIX A Terminal Description 27...
Page 31: ...NOTES 31...
