2.
FREQ STEP SIZE is displayed on the top line. Rotate the SELECT knob
until the word RX SIGNAL is displayed on the top line.
3.
Press the SELECT button to allow for changing the RX SIGNAL. A good
beep is emitted.
4.
Rotate the SELECT knob until the desired RX signal is desired. Press the
SELECT button to store the RX Signal and re-enter the personality menu.
A good beep is emitted.
5.
To exit the personality menu, press the ‘B’ button on the control head and
the radio will revert back to VFO mode. A good beep is emitted.
•
Changing TX SIGNAL
In VFO mode, the BCM-220 can be programmed to transmit no-tone, CTCSS, or
DCS signaling. This menu item allows for programming the TX Signal.
1.
Make sure the radio is in VFO mode. Press the ‘B’ button the control head
to access the personality menu. A good beep is emitted.
2.
FREQ STEP SIZE is displayed on the top line. Rotate the SELECT knob
until the word TX SIGNAL is displayed on the top line.
3.
Press the SELECT button to allow for changing the TX SIGNAL. A good
beep is emitted.
4.
Rotate the SELECT knob until the desired TX signal is desired. Press the
SELECT button to store the TX Signal and re-enter the personality menu.
A good beep is emitted.
5.
To exit the personality menu, press the ‘B’ button on the control head and
the radio will revert back to VFO mode. A good beep is emitted.
•
Changing the FREQUENCY OFFSET
The BCM-220 provides an easy way to make a quick selection of the 1.6 MHz TX
offset required by repeaters: -1.6 MHz, 0 Hz, and +1.6 MHz. In VFO mode, when
PTT is pressed, the radio adds the offset to the selected frequency. If the TX
frequency is out of range (222.0-224.995), a bad beep is emitted. Otherwise, the
call is permitted. To change the frequency offset, follow these steps:
1.
Make sure the radio is in VFO mode. Press the ‘B’ button on the control
head to access the personality menu. A good beep is emitted.
2.
Rotate the SELECT knob until FREQ OFFSET is displayed on the top line
and the current offset is displayed on the bottom line.
21
Summary of Contents for BCM-220
Page 1: ...BCM 220 User Manual By BridgeCom Systems Inc...
Page 27: ...APPENDIX A Terminal Description 27...
Page 31: ...NOTES 31...
