3. Connect the CP2-LTE Lead cable to the power adapter, lining up the arrows
on the silver cable connectors, and then gently push them together. The
power adapter switch can be turned to the ON position.
4. After connecting the power cable to the CP2-LTE power lead, layout the
power cable roughly where it will run once hidden behind the vehicle's
interior panels. This gives you an idea of where to route the cable and how
much slack to leave on the way down to the vehicle's power source.
5. Secure the power cable extension into the headliner and down the A-Pillar.
Route the power cable around the side and behind the rest of the interior
panel down towards the fuel box/Power source.
NOTE: Make sure the vehicle is off.
6. Connect the 3 required wires from the wire harness to the vehicle, shown
below in the diagram.