Getting Started
1. Peel the cover paper from the 3M Adhesive on the CP2-LTE top. Mount the
fully assembled unit to the windshield behind the rearview mirror. Holding
the camera in position facing the road with firm pressure for 30 seconds.
2. To adjust the camera angle, you can use the keys to unlock and remove the
cover plate. Pull or Slide the camera unit to the right of the bracket and
rotate it to the desired position.
When the angle is set, slide the unit to the left, locking the angle of the
camera to the windshield bracket. Connect the power cable before
replacing the cover. (See step 3 below)