WRT-750N User Manual
16
3.
Network Setup
3.1
LAN Setup
LAN TCP/IP Setup
These are advanced settings that you may configure if you are a network
administrator and your network contains multiple routers. If you make any changes
to these settings you will need to restart your computer(s) for the settings to take
effect.
•
IP Address:
Type the IP address of your router in dotted decimal notation
(factory default: routerlogin.net).
•
IP Subnet Mask:
The subnet mask specifies the network number portion of
an IP address. Your router will au.tomatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing subnet, use
255.255.255.0 as the subnet mask (computed by the router).
•
RIP Version:
This controls the format and the broadcasting method of the RIP
packets that the router sends. (It recognizes both formats when receiving.) By
default, this is set for RIP-2.
•
RIP-1 is universally supported. RIP-2 carries more information.
•
RIP Direction:
RIP (Routing Information Protocol, RFC1058 and RFC1389)
allows a router to exchange routing information with other routers. The RIP
Direction selection controls how the router sends and receives RIP packets.
Both are the default.