WRT-750N User Manual
22
•
WPA2-PSK [AES] - Wi-Fi Protected Access version 2 with Pre-Shared Key, use
WPA2-PSK standard encryption with the AES encryption type
•
WPA-PSK [TKIP] + WPA2-PSK [AES] - Allow clients using either WPA-PSK [TKIP]
or WPA2-PSK [AES]
To achieve the best performance with 11N wireless adapters under robust security
network, we recommend that you change your network's security option to
WPA2-PSK.
When you use WEP or TKIP security option, the WPS function will be truned off,
howere the WPS can not be activated when you change your encryption back to
WPA2 or AES. You need to go to the wps page to enable WPS function.
Security Encryption (WEP)
Authentication Type
Normally this can be left at the default value of Automatic. It can allow adapters use
either Open System or Shared Key to do the authentication. If you want to have
better secure authentication, then you can select Shared Key and you wireless
adapters can only use Shared Key to connect to this network.
Encryption Strength
Select the WEP Encryption level:
•
64-bit (sometimes called 40-bit) encryption
•
128-bit encryption
Security Encryption (WEP) Key
If WEP is enabled, you can input the four data encryption keys. These values must be
identical on all PCs and Access Points in your network.
WEP key setting
Select which of the four keys will be used, and enter the matching WEP key
information for your network in the selected key box.
For 64-bit WEP - Enter ten hexadecimal digits (any combination of 0-9, A-F).
For 128-bit WEP - Enter twenty-six hexadecimal digits (any combination of 0-9, A-F).
