Brice CX30E Operation And Safety Manual Download Page 2

Page: 2 / 14

Operation and Safety Manual

Model CX30E/35E Belt Driven Automatic Slicers

SAFETY ISSUES

NEVER

touch this machine without training and

authorisation from your supervisor.

2. Machine

MUST BE

on solid, level bench/table.

3. Guards

MUST BE

in place before plugging in and

turning on machine.

ALWAYS

use the three-pronged plug provided.

NEVER

use your hand to hold food stuffs in place on

the meat table.

NEVER

touch the slicer blade when it is rotating.

KEEP

hands, arms, hair and loose clothing

CLEAR

of all mov ing parts.

8. Should the slicer jam,

SWITCH OFF AND UNPLUG

before

re mov ing the obstruction.

SWITCH OFF AND UNPLUG

the machine from its power

source be fore cleaning, sanitizing or servicing.

10.

USE ONLY

the attachments provided by the

manufacturer and designed for this machine.

YOUR SAFETY IS OUR PRIMARY CONCERN

��

�� 

��

� ��

��

Summary of Contents for CX30E















Search results

Summary of Contents for CX30E

Reviews:

Brands by name

Popular brands

Brice CX30E, Operation And Safety Manual

Search results

Summary of Contents for CX30E

Reviews:

Brands by name

Popular brands