Operation and Safety Manual
Operation and Safety Manual
™
Model C30E/C35E Gear Driven Gravity Feed Slicers
Model C30E/C35E Gear Driven Gravity Feed Slicers
10. Lower the sharpener cover (1) .
The grinding stone (5) Should be kept clean and
free of grease for the best sharpening perfor-
mance. It can be easily removed for cleaning.
Simply pull it out of its holder as shown.
2
1
5
Electrical safety
The Model C30E and C35E are both fi tted with safety cut-out switches that will
automatically stop the machine if, while running, the blade cover securing knob is released
or the blade binds or jams. If any of these events occurs, either replace the relevant
component or disconnect the slicer from the power supply, clear the jam and switch the
machine back on.
Maintenance 4.3
Indication Problem
Problem
Problem
Solution
Machine does not operate
Poor/no electrical current
Fuse blown (if fi tted)
Other parts fo machine
are defective
Notify Brice service
Replace fuse
Notify Brice service
Machine slices poorly
Blade is not sharp enough
Sharpen the blade
Carriage does not run
smoothly
Slide bar requires oiling
Notify Brice service
The meat grip does not
slide smoothly
The meat grip is dirty or
requires oiling
Clean and oil meat grip
slide bar
Blade stops rotating whilst
slicing meat
Motor drive belt is loose
or broken
Notify Brice Service
Motor runs but blade does
not rotate
Motor drive belt is
cracked or broken
Notify Brice Service
Troubleshooting
This section deals with the problems you may fi nd when using the Model C30E and C33E,
and the methods and procedures for solving them quickly and easily.
Mechanical or electrical problems during operation
