Bricasti Design M7 Owner's manual, Owner'S Manual

Page: 12 / 44

Front Panel Overview
tap
1 2 3 4
prog Reg
System
Edit
Store
Enter
C o n c e r t H a l l
1 2 3 4 6 7 8 9 12 13 14
11 10
5
M7
H a l l s
+
Input
1. Input Level
Analog audio input level adjustment.
Precision, re-settable stepped analog audio
input knob in 2dB steps from +8 dbm to +24
dbu.
2. Level Meters
Displays the current input level, or output
level, software selectable.
3. Display
Display for the program, edit parameters,
and system parameters that are being
adjusted or selected.
4. Cursor Up/Down Keys
Controls lower display, selects reverb effect
parameters, program banks, system
parameter types, register banks.
5. Program Select and Effect Adjust
Knob
Controls upper display and scrolls through
programs in the program mode, adjusts
effect parameters in edit mode
.
6. System Key
Takes you to the system menu to select
system setup parameters.
7. Edit
Key
Brings you to the effect edit page of the
current running program.
8. Enter Key
Press to confirm operations like loading a
selected program.
9. Store Key
Press to store an edited program in a
register.
10. Program Key
Takes you to the program select mode. Use
the adjust knob to scroll through programs,
press
Enter to select.
11. Reg Key
Takes you to the user register bank where
edited presets are stored and labeled.
12. Favorite Keys
Pressing and holding one of these keys will
store your current running program in its
current state. Pressing once quickly will
recall the program.
13. Tap Key
Used to “tap”-in time based parameters
14. Power on off switch
Left position is OFF, right position is ON
1-1