Brew
Ratio
BRWC-1053
the Barista Kit
Revision 1.0
Page 4
27 July 2020
After confirming the calibration weight, press the [O] button and it will show ‘CAL’. The required
calibration weight will be flashing.
Place the required calibration weight onto the panel and press the [O] button. The LCD screen will
show ‘PASS’, calibration is now completed. Remove the calibration weight to use the scale.
Please try to use the maximum calibration weight to ensure higher accuracy of the scale.
5.
Troubleshooting
The primary reasons for inaccuracy or malfunction are low battery, incorrect calibration, overload or
operating on an unstable surface. This scale is a sensitive instrument and should be handled with the
utmost care and caution.
Error Code:
[DISPLAY] - Elimination of errors
[OUT2] - Calibration again
[EEEE] - Immediately remove overweight items to avoid causing damage to your scale
[UN2T] - Use the scale in a more stable position
[LO] – Low voltage, please replace with new batteries
