background image

Page 2 

 

IMPORTANT INFORMATION & SAFEGUARDS 

Read all instructions and safeguards included in the packaging carefully and completely before installing or operating this equipment.  Save all instructions for future 

reference. 
To reduce the risk of fire or electric shock, do not remove covers.  There are no user serviceable parts inside.  Repairs should be done by authorized service personnel 

only.  If this appliance should fail to operate properly, contact the nearest Brewmatic Authorized Service Center or you can contact Brewmatic  direct at 800-421-6860. 

Only Authorized Replacement Parts Should Be Used.

  Part substitutions could create a fire hazard and the risk of personal injury.  The use of replacement parts or 

accessory attachments not recommended by Brewmatic may be hazardous. 

Do Not By-Pass Any Safety Mechanisms Or Operate This Appliance Without Covers In Place.

  Brewmatic requires that all safety devices and covers be in place and 

functioning at all times to guard against a fire hazard and the risk of personal injury. 
Do not touch hot surfaces. Use handles or knobs whenever possible. 
Do not let power cord hang over the edge of table, counter or touch hot surfaces. Close supervision is necessary when any appliance is used by or near children. 
Do not use outdoors. Do not use appliance for other than intended use. 
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest 

authorized service facility for examination, repair or adjustment. 
The container is designed for use with this appliance. It must never be used on a range top.(Unless specific instructions for use on a range top are provided and include 

the precautions to be observed.) Do not set a hot container on a cold surface. Do not use a cracked container or a container having a loose or weakened handle. Do not 

clean container with cleansers, steel wool pads, or other abrasive material. 

Brewmatic Does Not Recommend, And Will Not Furnish Anyone With Information For Changing The Electrical Rating Of Any Appliance Manufactured Or Distributed 

By Brewmatic .

  Brewmatic will not approve of any unauthorized changes to the basic design of this appliance.  Any modification or alteration to the appliance may create 

a fire hazard, may create a risk of personal injury, may void the safety listings and may void the warranty. 
All procedures, diagrams and specifications contained in this manual are based on the latest information available at the time of publication.  Information, parts and 

specifications are subject to change without notice. 
Due to periodic reviews and changes in listing standards, listings and approvals may change at any time.  For current listing and approval information contact Brewmatic. 

Plumbing connections - 

All plumbing connections to water supply lines and drains should be performed by a licensed plumber complying with all applicable plumbing 

codes having jurisdiction. 

Electrical connections - 

With the exception of cords with plugs already attached, all electrical connections or alterations to the Power/Off/Fill supply should be performed 

by a licensed electrician complying with all applicable electrical codes having jurisdiction. 
When calling for information, parts or service, have the following information available: 

Model Number:  

 Serial Number:  

 

Voltage:  

 Amps:  

 Phase:  

  

Date Of Purchase:_____________________________ 

Electrical information may be obtained from the electrical information nameplate located on the appliance.

 

 

SAVE THESE INSTRUCTIONS 

 

LIMITED WARRANTY 

Brewmatic warrants this product to be free of defects in material and workmanship for a period of one (1) year from the original date of purchase.  Within this warranty 

period, Brewmatic will repair or replace, at its option, any part providing it's defective in material or workmanship.  Labor is included within this warranty only during the 

first ninety (90) days of the warranty period. 

This warranty excludes defects caused by negligence, misuse, alteration, accident, prior service by unauthorized persons, and failure to follow the installation and 

operating instructions, including without limitation use of improper voltage or wiring and improper cleaning. 

This warranty applies only to new products and extends only to the original purchaser.  This warranty is valid only in the United States of America and its possessions. 

The product warranted hereby is sold only for commercial use and is not intended for personal, family, or household purposes. 

To obtain warranty service, you must notify and deliver the product at your expense, with proof of purchase, to your local Brewmatic representative or to the Brewmatic 

Customer Service Division, within the warranty period.  The repaired product will be returned to you at Brewmatic's expense. 

No Brewmatic representative or other person is authorized to add to or alter the foregoing in any respect. 

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES FOR MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE.  THIS WARRANTY EXCLUDES CONSEQUENTIAL DAMAGES. 

Some states do not allow limitation or exclusion of implied warranties or consequential damages.  In such cases the limitations stated above may not apply to you, and 

your rights will be determined by applicable law. 

Summary of Contents for 1033510












Reviews: