![BREWISTA Cold Pro Nitro 2 Owner'S Manual Download Page 7](http://html1.mh-extra.com/html/brewista/cold-pro-nitro-2/cold-pro-nitro-2_owners-manual_2809861007.webp)
7
For use with the included Bag in Box (BiB) system:
•
Connect the BiB Adaptor (14) to your BiB bag of coffee or tea. Lift the collet of
your BiB Adaptor and place it on comfortably on the nozzle of the BiB bag.
•
Note that the nozzle must be facing the direction of the tube as that will be
the flow of the liquid. Turn the screw at the far side of the BiB Adaptor so that
it pierces the nozzle and is securely in place.
•
Connect the BiB adaptor to the Cold Brew Inlet (5) of your Cold Pro Nitro 2™
using the short length of tubing attached to it.
◦
Use of the provided BiB system included with your Cold Pro Nitro 2™ is
not required. You can use your own BiB bags and adaptors if you choose.
Simply attach your desired BiB adapter to the intake tube and use a
corresponding BiB bag with the appropriate nozzle.
◦
If you do not wish to use a BiB system, simply remove the BiB adaptor
from the end of the intake tube.
Dispensing your Nitro Cold Brew
1) Push power button (6) on the bottom of the machine to the “I” (on) position.
2) Place a glass under the tap-outlet spout (3) and pull the tap handle (1) forward
to about a 90° angle.
3) The unit now pumps the coffee from the container and after a short period of
time, cooled and nitrogenated cold brew coffee flows out of the tap. You may
need to tap 1-2 glasses until you reach the desired foam level.
4) To stop dispensing, tilt the tap handle (1) upwards to a vertical position.
Adjustable Settings
•
Temperature
The target dispense temperature is set at 36°F / 2°C (+/- 2°F or 1°C) by default.
◦
The temperature control knob is in the control panel at the side of the
machine.
◦
To switch the cooling system off, turn the knob to the OFF position.
Make sure there is an audible clicking sound when turning it off.
◦
To achieve the coldest temperature, turn the knob to the MAX position.
•
Gas Level
Locate the nitrogen control knob in the control panel (6) at the side of the
machine.
Pull nitrogen
control knob
outwards gently
until it clicks out
of place.
Turn knob
towards the
minus (-) sign
to decrease
the nitrogen
and towards
the plus (+) to
increase.
Push knob
gently until it
clicks in place.
Note:
◦
Keep nitrogen level
between 0 (no
Nitrogen) and 2.
◦
The default factory
setting for nitrogen
level is at the
recommended level
of 1.
◦
Any setting over 2 risks
putting too many large
bubbles in your Nitro
beverage.