10
Maintenance
The Cold Pro Nitro™ System has very little maintenance requirements.
Remove Dust at the Air Intake Vents (9)
•
Blow away any dust particles that settle at the air intake vents on the side of the
dispenser at least every 6 months or as needed. Dust particles on this vent can
reduce the machine’s cooling efficiency.
Changing O-rings and Connectors
•
If a BiB system is used, O-rings or connectors may need to be changed periodically.
Frequency of changing these parts depends on the specific system being used.
•
Brewista recommends checking these connections about once a month to ensure
proper system function.
Other Maintenance and Repairs
•
In case of failure, problems, or a suspected fault resulting from a fall, immediately
remove the plug from the power socket and alert a service provider or specialized
technician. Never attempt to operate the Cold Pro Nitro 2™ if it is faulty. Please
report any fault in the Cold Pro Nitro 2™ to your service provider. Only qualified
service providers may carry out servicing operations and repairs on the Cold Pro
Nitro 2™. Contact Brewista at [email protected] for more information.
