BrewBuilt 1550DV4NG, Manual

Page: 7 / 13

ensure that the hoses are sanitized by the boiling wort.
3. If you are using a Counterflow Chiller with your system, we recommend that the
Whirlpool Circuit be set up as Boil Kettle to Pump to Chiller to Whirlpool Valve.
That way your boiling wort will sanitize the interior of your chiller, and when the
whirlpool is finished you can simply disconnect the hose from the Whirlpool Valve
and direct it to your fermenter.
How to Program Boil Additions
Boil Mode allows you to enter a custom boil time and then set alerts for up to 5 events with
any amount of time remaining in the boil, most often used for hop and clarifier additions.
1. Boil Mode can be entered from the main screen or directly from the Sparge Mode
screen.
2. From the Boil Mode screen, find and press the “Edit Boil Timers” button.
3. The Total Boil Time and each Boil Addition can be set by pressing the “000” to the
right of the listing to select it, then changing the value with the on-screen keypad.
Store the new value by pressing the green “Enter” button.
4. When you have set all of the alerts that you want, press the DONE button to return to the Boil Mode screen.
5. Once the kettle reaches a boil and you are ready, start the timer by pressing the “Pause/Start” button to begin the
countdown timer.
6. When the alert times you set are reached you’ll see a visual alert and hear an audible alarm. You can turn off the alarm
with the “Silence Alarm” button.
7. When you are ready to begin your whirlpool, press the “Pump 2” button
Hoses set up for transfer to fermenter
*Shown on a Low Rider System
BrewSculptures™ is a trademark of MoreFlavor!
™
Inc. This document is copy written by MoreFlavor!
™
Inc.