32
INSTALLING THE GEAR UNIT
Dana Incorporated
IMM-0017EN - Installation and Maintenance Manual
7.9 COVER ABRASIVE AMBIENT
If the gear unit will be placed on a abrasive ambient be sure that the output seals are covered so that no abrasive material,
chemicals or water touches the seals. Any pressure coming from outside over the seals can cause that the out staying sub-
stances to enter the gearbox and cause serious damage to the gear unit. If pressure or abrasive material can not be prevented
from coming over the sealing, contact Dana Motion Systems Italia S.r.l. for solutions.
7.10 CHECK ACCESSIBILITY TO FILLING, BREATHER AND DRAIN PLUGS
The filling, breather and drain plugs must be freely accessible for further checking and service.
DANGER
Abrasive material, chemicals, water, positive or negative pressure exceeding 0,2 bar can affect or damage the sealing lip or
output shaft. Inside entering substances from the seals can cause serious damage to the gear unit.
