24
SAFETY
Dana Incorporated
IMM-0017EN - Installation and Maintenance Manual
5.3 SAFETY INSTRUCTIONS
5.3.1 GENERAL SAFETY INSTRUCTIONS
5.3.1.1 Working on the gear reducer
5.3.1.2 Operation
5.3.1.3 Maintenance
WARNING
Inappropriately executed work can lead to injury or damage.
Make sure that the gear reducer is only installed, maintained and dismantled by trained technicians.
WARNING
Foreign bodies spinning through the air can cause grave injury.
Before putting the gear reducer into operation, check that there are no foreign bodies or tools near the gear reducer
WARNING
Touching hot surfaces can lead to burns.
Do not touch the gear reducer if their operation temperatures are too high, or use suitable safety equipment like gloves.
WARNING
Rotating machinery can lead to injuries. There is danger of being trapped or pulled in!
Keep a sufficient distance and make safeguarding to rotating machinery. See relevant norms EN349+A1, EN13857.
WARNING
An unintentional start of the machine during maintenance work can lead to serious accidents.
Make sure no one can start the machine while you are working on it.
WARNING
Even a brief running of the machine during maintenance work can lead to accidents if the safety devices are not operating.
Make sure that all safety devices are mounted and active.
