THE UNIQUELY DESIGNED
‘CHILL CELLS’
Your Breville Wine Chiller comes with three
specially designed ‘Chill Cells’ to enable you
to chill wine in minutes.
The ‘Chill Cells’ are filled with special gel
which is a safe, food grade material able to
freeze and hold temperature very efficiently.
If you damage or lose your ‘Chill Cells’,
please contact the Breville Customer Care
Centre to order a replacement.
USING ICE
The Breville Wine Chiller has been designed
to be used with the ‘Chill Cells’ or ice cubes.
Simply place two trays of ice cubes into the
Wine Chiller before adding the water to chill
then switch on.
USING THE TIMER
Your Wine Chiller features a 15 minute timer
designed for optimal chilling of beverages.
If you need to reduce the time selected on
the timer, simply turn the timer dial in an
anti-clockwise direction until the desired
time is reached.
USING THE MANUAL FEATURE
For chilling beverages without the timer,
simply turn the control dial to the left. To
stop chilling slowly turn the control dial to
the OFF position.
BATTERY OPERATION
Your Wine Chiller is designed to be battery
operated. This is perfect to be able to chill
bottles of wine while at a picnic or BBQ.
Simply insert seven (7) AA size batteries
into the base of the Wine Chiller.
The Wine Chiller should last 3 hours
using battery operation.
OPERATING YOUR BREVILLE WINE CHILLER cont’d
7
BEFORE FIRST USE
Remove all promotional labels and place the
specially designed ‘Chill Cells’ into the
freezer for a minimum of 8 hours to freeze.
1. Place the Wine Chiller on a flat, dry
surface and ensure that the unit is
unplugged and the control dial is set to
the ‘OFF’ position.
2. Remove the ‘Chill Cells’ from the freezer
and place around the inside of the Wine
Chiller (see Fig 1).
3. Place the bottle to be chilled into the
Wine Chiller.
4. Using a jug, pour in cold tap water into
the Wine Chiller until just covering the
‘Chill Cells’.
5. Plug the AC adaptor into a 230/240v AC
power outlet and turn the power ‘ON’
6. To chill a single bottle, set the Timer
by turning the control dial to the
desired setting. (refer recommended
times on page 8)
7. Once the first bottle is chilled, the Breville
Wine Chiller is ready to chill the next bottle
to perfection. Simply remove the first
bottle, and replace with the next room-
temperature bottle ready for chilling.
8. When you have finished chilling, turn the
appliance OFF at the power outlet and
remove the adaptor from the rear of the
motor base.
9. Your Breville Wine Chiller can now be
taken to the table to be used as an ice
bucket to keep the beverages chilled.
10.Once you have finished using the Wine
Chiller, pour out the water. Remove the
‘Chill Cells’, drain and dry thoroughly
then stack them back in the freezer for
next time.
11.Finally, allow the unit to dry thoroughly.
OPERATING YOUR BREVILLE WINE CHILLER
6
Always keep the 'Chill Cells'
in the freezer as they will
always be ready to chill
wine for unexpected guests.
When not using the battery
feature, do not store the Wine
Chiller with batteries located
inside as they may leak.
Your ‘Chill Cells’ can also
be used to keep food or
beverages cool in an esky.
Simply place the frozen
‘Chill Cells’ into the esky
instead of ice.
Fig 1
