Care and cleaning
Always unplug the kettle from the mains supply socket and
allow it to completely cool down before cleaning or descaling it.
Do not immerse the kettle, power base or power cord and plug
in water or any other liquid.
Clean the exterior surface of the kettle with a damp cloth and then
polish with a soft dry cloth. Do not use steel wool pads or harsh/
abrasive cleaners.
Descale your kettle regularly to keep it working efficiently. Use
a proprietary descaling product following the manufacturer’s
instructions carefully.
Cleaning the filter
Open the lid and remove the filter from behind the spout.
Rinse the filter under a tap whilst brushing it with a soft brush. In
hard water areas it may be necessary to descale the filter using a
descaling agent.
Use a proprietary descaling product following the manufacturer’s
instructions carefully. The filter may be washed safely in the
cutlery rack of a dishwasher.
Refit the filter back into the kettle.
Replacement filter
A replacement filter can be obtained by phoning our Customer
Service Department on 0161 621 6900. They will give you up to date
prices, inclusive of VAT and postage and packaging.
Filter part number
91345
Guarantee
This product is guaranteed for a period of 1 year from the date of
purchase against mechanical and electrical defects.
This guarantee is only valid if the appliance is used solely for
domestic purposes in accordance with the instructions provided, that
it is not connected to an unsuitable electricity supply, dismantled or
interfered with in any way or damaged through misuse. Under this
guarantee we undertake to repair or replace free of charge any parts
found to be defective.
Nothing in this guarantee or the instructions relating to the product
excludes, restricts or otherwise affects your statutory rights.
In line with our policy of continuous development, we reserve the right
to change this product, packaging and documentation without notice.
1.
2.
•
•
•
•
Electrical safety
This appliance must be earthed.
This appliance is fitted with either a moulded or rewirable BS1363, 13
amp plug. The fuse should be rated at 13 amps and be ASTA approved
to BS1362. If the fuse in a moulded plug needs to be changed, the fuse
cover must be refitted. The appliance must not be used without the fuse
cover fitted.
If the plug is unsuitable, it should be dismantled and removed from
the supply cord and an appropriate plug fitted as detailed below. If you
remove the plug it must not be connected to a 13 amp socket and the
plug must be disposed of immediately.
If any other plug is used, a 13 amp fuse must be fitted either in the plug
or adaptor or at the distributor board.
Plug should be BS1363 approved
Fit a 13 Amp Fuse
Ensure that the outer sheath of the cable is firmly held by the clamp
BROWN
(Live)
13 Amp
Fuse
BLUE
(Neutral)
GREEN/YELLOW
(Earth)
After sales service
To return a faulty appliance to our Customer Service Department:
Pack it carefully (preferably in the original carton). Ensure the unit is
clean.
Enclose your name and address and quote the model number on all
correspondence. Give the reason why you are returning it.
If within the guarantee period, state when and where it was
purchased and include proof of purchase (e.g. till receipt).
Send it to our Customer Service Department at the address below:
Customer Service Department
Pulse Home Products Limited
Middleton Road
Royton
Oldham
OL2 5LN, UK.
Telephone: 0161 621 6900 Fax: 0161 626 0391
e-mail: [email protected]
1.
2.
3.
4.
VKJ507_Iss_2 05/11
93321-1
