![Breville VCF125 Manual Download Page 21](http://html1.mh-extra.com/html/breville/vcf125/vcf125_manual_2809033021.webp)
21
- Place Filter Basket into Group Handle
(without coffee) & insert into Group Head.
- Turn the DIAL to the ONE CUP setting.
Water will pour through.
- Return DIAL when finished.
- Repeat if needed.
Cleaning Steam Wand
• Every time
- After texturing milk purge the Steam
Wand by turning the DIAL to HOT WATER
for just 1-2 secs.
- Wipe the Steam Wand with a damp cloth.
(See Operating Guide page 10-11)
• 2-3 Months
- Soak the Steam Wand overnight in
the Milk Jug with warm water & add one
Cleaning Tablet.
- In the morning remove the Jug & rinse
ensuring that all traces of the solution have
been removed.
- Wipe Steam Wand & Tip with a damp
cloth ensuring that all traces of the
cleaning tablet have been removed.
- Run Hot Water through the Steam Wand
for 40 secs.
• Unblocking Steam Wand
- Insert the 'Steam' Cleaning Pin up the
Steam Wand Tip hole. (Cleaning Pin
located in the 'Accessories' storage area
under the Drip Tray).
- Run Hot Water through the Steam Wand.
• Steam Wand Remains Blocked:
- Unscrew the Steam Wand Tip & soak
overnight in the Milk Jug with warm water
& add one Cleaning Tablet.
- In the morning rinse the Jug & Steam
Wand Tip under running water ensuring
all traces of the cleaning tablet have been
removed.
- Use the Cleaning Pin to clean the Steam
Tip.
- Screw the Steam Wand Tip back into the
Steam Wand Arm.
- Run Hot Water through the Steam Wand
for 40 secs.
Group Head Rubber Seal
A rubber seal is located in the Group
Head and creates a seal against the Filter
Basket when making an espresso.
Important:
When your espresso machine
is not being used, we recommend that you
do not leave the Group Handle inserted
into the Group Head, as this will reduce
the life of the seal.
Over time this seal loses its elasticity and
may require replacement. The seal may
need replacing when watery espresso
leaks from around the Group Head, or if
the Group Handle feels loose when fully
rotated to the centre position.
Note:
Contact Breville should you think
that the Group Head seal needs replacing.
Do not attempt to change the seal without
first consulting Breville.
ESPRESSO
MACHINE
CLEANING
TABLE
TS
STEAM
INSERT
CARE & CLEANING
FILTER
INSERT
DUA
LW
ALL
UNSCREW