background image

7

Functions

BEFORE FIRST USE

Remove and safely discard any promotional 

labels and wipe the cooking plates with a damp 

cloth, then dry thoroughly. Season the plates 

before use as per the instructions in the Care, 

Cleaning & Storage section of this book.

OPERATING YOUR SANDWICH PRESS

1.  Slide the handle locking clip on the 

sandwich press from locked to unlock and 

insert the power plug into a 230/240V 

power outlet and turn the power on.

2.  The ‘POWER’ light will illuminate red and 

start pre-heating. While pre-heating, prepare 

the sandwiches by buttering the bread and 

preparing the filling.

3.  Once the sandwich press has finished pre- 

heating, the ‘READY’ light will illuminate 

green and is ready to use. 

4.  For a sandwich, place the buttered bread 

on the bottom heating plate with the butter 

side down. Place the filling onto the bread, 

then cover with another slice of bread, butter 

side up. The sandwich press can fit two 

sandwiches to be toasted at one time.

NOTE

For Pitas or wraps, add the filling and fold the 

flaps together before placing in the  

sandwich press.

5.  Carefully close the lid, then set your required 

heat level by using the temperature adjust 

slider. Slide to select heat level between low 

to high heat.

6.  When the sandwich is cooked, remove using 

a plastic heat resistant or wooden spatula. 

Never use metal tongs or a knife as these can 

cause damage to the non-stick coating.

7.  To maintain heat if cooking in batches, keep 

the lid closed until you are ready to toast the 

next sandwich.

NOTE

The green 'READY' light will continue to cycle 

on and off to indicate the sandwich press is 

maintaining the correct temperature.

NOTE

Do not use metal utensils as they will scratch 

the non-stick cooking surface.

NOTE

When using the sandwich press for the first 

time you may notice a fine smoke haze.  

This is caused by the initial heating of some of 

the components. There is no need for concern. 

 

WARNING

Steam will be ejected from between the 

cooking plates when the lid is closed. Be 

careful not to make contact with the steam as it 

may cause burns.

WARNING

The temperature of accessible surfaces may be 

high when the sandwich press is operating. 

Summary of Contents for Temp Adjust LSG842













Reviews: