Breville Sear & Press BGR700, Instruction Book

Page: 13 / 32

13
Care & Cleaning
NOTE
The drip tray can also be washed
in a dishwasher.
WARNING
Extreme caution must be used when handling
the drip tray containing hot fats and juices.
CLEANING THE COOKING PLATES
1. Wipe the cooking plates with a soft cloth
to remove food residue.
2. Alternatively, release and remove the
cooking plates:
a) Always ensure the grill is completely cool.
b) Use the handle to open the top plate to
a 90 degree position.
c) Use the PLATE RELEASE on the front,
right side of the top plate to remove
the top cooking plate, and the PLATE
RELEASE on the right side of the control
panel to remove the bottom cooking
plate.
d) Once released, gently slide the plates
off the grill.
3. Place the cooking plates in the dishwasher
(top shelf only).
4. Alternatively, wash the cooking plates in
hot soapy water with a soft, damp sponge.
A non-abrasive liquid cleanser may be
used to avoid build-up of stains. Apply the
cleanser to the sponge, not the plate, before
cleaning. Remove stubborn residue with a
non-abrasive plastic scouring pad or nylon
washing brush.
5. Rinse and dry thoroughly. Always ensure
the cooking plates are correctly re-inserted
and securely locked back into position after
cleaning and prior to inserting the power
plug into a wall outlet.
Ensure the grill is turned OFF by pressing
the POWER button. Remove the power plug
from the wall outlet. Allow the grill to cool
completely before disassembling and cleaning.
Always clean the outer body, drip tray and
cooking plates after each use to prevent
a build-up of ingredients.
NOTE
Do not use abrasive cleansers or metal
scouring pads on any of the interior or exterior
surfaces of the grill. These will scratch the
surfaces and damage the non-stick coating
on the cooking plates.
WARNING
Do not immerse the body, power cord or power
plug in water or any other liquid as this may
cause electrocution.
CLEANING THE OUTER BODY
Wipe the outer body with a soft, damp sponge.
A non-abrasive liquid cleanser or mild spray
solution may be used to avoid build-up of
stains. Apply the cleanser to the sponge, not
the grill surface, before cleaning. Rinse. Let all
surfaces dry thoroughly prior to inserting the
power plug into a wall outlet.
CLEANING THE DRIP TRAY
After each use, slide out the drip tray and
discard contents. Wash the tray in warm soapy
water with a soft, damp sponge. A non-abrasive
liquid cleanser may be used to avoid build-up
of stains. Apply the cleanser to the sponge,
not the tray, before cleaning. Rinse and dry
thoroughly. Always ensure to re-insert the drip
tray into the grill after cleaning and prior to
inserting the power plug into a wall outlet.
BGR700_USC_IB_D18.indd 13 4/12/18 9:32 am