11
BEFORE FIRST USE
•
Remove and safely discard any packaging
material or promotional labels attached to
your purifier fan heater and filter. Check for
any missing or damaged parts as per the
components list.
•
Remove the filter from the purifier fan heater
(see REPLACING THE FILTER on page 19)
and take it out of the plastic bag. Then re-
insert the filter into the purifier fan heater.
•
Select a flat and level location for the
purifier fan heater
•
For proper air flow, locate the unit at least
20cm from any wall or furniture.
•
Ensure the air inlet and outlets are not
blocked before use.
•
Ensure the filter has been fitted correctly as
per the instructions in this book.
•
Plug the power plug into a 230V or 240V
power outlet and turn on the power outlet.
WARNING
Remove the filter packaging before first use.
IMPORTANT
When moving the purifier fan heater, always
lift the unit using two hands and set down
gently on a flat and level surface.
10. Ensure the mist nozzle is fitted correctly on
the mist guide of the water tank. If tilted,
lightly push the mist nozzle back onto
the mist guide.
11. Replace the top cover back on the water
tank, ensuring the tab sits in the top back
of the humidifier. The top cover should sit
flat and the mist nozzle should be flat to
the top cover when correctly positioned on
the humidifier.
✔
✘
IMPORTANT
Ensure the top cover sits flat on the top of the
humidifier. If the mist nozzle sits higher or
lower than the top cover when in operation,
condensation will build on the top cover and
around the humidifier.
12. Connect the power plug to a 230V or 240V
power outlet and switch the outlet on. The
POWER symbol will illuminate red and
the WI-FI icon will flash. The humidifier
is now in Standby mode.
13. Touch the POWER symbol to activate
the control panel and display screen. The
humidifier is now switched on and will
automatically begin operation in
FULL AUTO mode.
IMPORTANT
Water may remain in the water inlet basin
even though the water tank may be empty.
However, once the water in the tank and/or
basin is too low to keep the humidifier running,
the humidifier will stop working. Refill the tank
with water. Do not use the humidifier without
water in the water tank.
NOTE
Take care when removing the water tank from
the body after use as residual water may drip.
