7
Keep Warm Setting
1. To use the Keep Warm setting, fill the kettle
and switch on as normal.
2. Once the kettle has boiled, depress the Keep
Warm button to the right to activate. The orange
‘KEEP WARM’ light will illuminate.
3. The Keep Warm setting will then keep the water
in the kettle at near to boiling point.
4. To reboil, press the ON/OFF switch to the ‘ON’
position. The kettle will reboil in a few seconds.
Safety boil dry protection
The kettle is fitted with a safety device, which
protects against overheating should the appliance
be operated with insufficient water. If this occurs
the kettle will stop heating. Switch ‘OFF’ at the
power point and allow kettle to cool before refilling.
The safety device will automatically reset when the
kettle has cooled down.
For additional safety your kettle is fitted with an
additional thermal cut out. In the event of
overheating, the kettle will automatically shut down
to prevent further damage. Should this occur, take
your kettle to an authorised Breville Service Centre.
