
8. When mixing is complete move the speed
selector switch back to the ‘OFF’ (O)
position. Turn the power off at the power
outlet and unplug cord.
9. Remove the beaters by pressing the eject
button while grasping the beater shafts.
The beaters will be released
automatically. DO NOT try to pull the
beaters out of the sockets.
TURBO BOOST FUNCTION
Pressing the Turbo Boost button while
mixing provides an extra burst of power,
overriding the speed setting being used.
Press the Turbo Boost button and hold
it down for no more than 30 seconds to
avoid overheating. After the Turbo Boost
has been used, always turn the mixer
off and allow it to cool down for a few
minutes before using again.
ASSEMBLY AND OPERATION cont’d
7
Avoid allowing the beaters
to hit against the side of the
mixing bowl while the
mixer is operating as this
will result in damage to
the beaters.