background image

12

REPLACING THE FILTER 

Your Easy Air

TM

 Connect Purifier filter should 

be replaced in the time frames indicated below.

• 

The filter life is approximately 6 months  

if used 24 hours daily, or 12 months if used  

12 hours daily.

• 

The filter life may vary to this timing, 

depending on environmental conditions.

• 

Remove all packaging from the replacement 

filter and place the filter into the unit as 

described below.

1.  Carefully turn your air purifier upside down  

and remove the locking knob from the base  

of the unit.

2.  Remove the base plate.
3.  Remove the used filter, being careful that 

any residue or debris that may fall from the 

filter will not cause damage.

4.  Insert the replacement filter into the unit, 

ensuring that it is correctly fitted and 

centred.

5.  Replace the base plate and refasten the  

locking knob.

6.  Return the air purifier to an upright 

position.

7.  Turn on the air purifier then press and  

hold the   POWER button for 5 seconds 

to reset the Filter Reset light.

8.  If the Wi-Fi is connected, while the reset 

filter light is reset, the Wi-Fi will need to be 

re-activated. Press and hold the   again 

until the light illuminates on the Wi-Fi icon.

NOTE

There is no top or bottom on the filter. The 

filter can be placed into the unit either way.

NOTE

If the filter is not in place or not fitted correctly, 

the air purifier will not operate.

WARNING

Unintended use of the air purifier or damage 

to the housing may result in the escape of 

dangerous UV-C radiation which is dangerous 

to the eyes and skin. Never operate the UV-C 

light outside of the air purifier.

UV-C LIGHT CARE

The replacement of the UV-C light must be 

undertaken at an authorised Breville service 

centre. Please contact Breville Customer 

Service Centre for further support.

REPLACEMENT FILTERS 

Replacement filters must be purchased from 

the Breville website^ or at participating retail 

outlets.
See the table below for the replacement 

product code to suit this Breville Air

 

Purifier.

Breville Air

 

Purifier 

Model No.

Filter Replacement 
Product Code

the Easy Air

TM

 

Connect 

LAP158WHT

LAP015WHT

the Smart Air

TM

 

Connect 

LAP308WHT

LAP030WHT

the Smart Air

  

Plus

TM 

Connect 

LAP508WHT

LAP050WHT

^Delivery charges may apply. 

Please contact Breville Customer Service 

Centre for further support.
Only use the original Breville filter specially 

intended for this appliance. Do not use any 

other filters.

Summary of Contents for Easy Air LAP158

















Reviews: