Breville Duo-Temp Pro BES810 series, Instruction Booklet

Page: 27 / 36

27
PAge heAder..... TROUBLEShOOTING
PROBLEM POSSIBLE CAUSES WhAT TO dO
Coffee does not run
through
• Machine is not turned
On
Ensure the machine is
plugged in, switched On
at the power outlet and the
POWER button is pressed.
• Water tank is empty Refer to ‘Filling The Water
Tank’, page 14.
• The Control Dial not in
‘Espresso’ position
Turn the Control Dial to
the ‘Espresso’ position
• Coffee grind is too fine Ensure you use a suitable
espresso grind. Refer to
‘The Grind’, page 18.
• Too much coffee in the
filter basket
Refer to ‘Coffee Dose and
Tamping’, page 18.
• Coffee tamped too
firmly
Refer to ‘Coffee Dose and
Tamping’, page 18.
• The filter is blocked Use a pin to clear the holes.
Please refer to ‘Cleaning
Filter’, page 25.
Coffee runs out too
quickly • The coffee grind is too
coarse
Ensure you use a suitable
espresso grind. Refer to
‘The Grind’, page 18.
• Not enough coffee in
the filter
Refer to ‘Coffee Dose and
Tamping’, page 18.
• Coffee not tamped
firmly enough
Refer to ‘Coffee Dose and
Tamping’, page 18.
Coffee is too cold • Cups not preheated Preheat cups. Refer to
‘Pre-heating Cup or Glass’,
page 18.
When the base of the jug
becomes too hot to touch
this is when milk is heated
at the correct temperature.
Refer to ‘Texturing Milk’,
page 20.
BES810BSS_ANZ_IB_E14.indd 27 27/06/2014 5:26 pm