Breville Duo-Temp Pro BES810 series, Instruction Booklet, Page: 23 / 36

23
CARE & CLEANING
The water filter provided helps to prevent
scale build up which over time can affect the
performance of your machine, potentially
causing blockages and heating problems.
Replacing the water filter every two months
will reduce the mineral build up in the
machine.
If you live in a hard water area, we
recommend you change the water filter
more frequently.
Replacing The Water Filter
• Remove the filter from the plastic bag,
and soak in a cup of water for 5 minutes.
• Rinse the filter under cold running water
for 5 seconds.
• Wash the stainless steel mesh in the
plastic filter compartment with water
and assemble.
• Set the date dial 2 months ahead.
• To install, push down to lock into place.
The water filter can be removed
from the water tank during operation if
not required.
PORTAFILTER CLEANING
Periodically run water through the machine
with the portafilter in place, but without
any ground coffee, to rinse out any residual
coffee particles.
NOTE
For replacement water filters contact
Breville Customer Service Centre on
1300 139 798 (Australia) or
0800 273 845 (New Zealand).
MAChINE CLEANING
After regular use, residual grinds and oil
build up in the machine can affect coffee
extraction. We recommend performing a
cleaning cycle every 2-3 months using the
cleaning tablet provided.
To perform a cleaning cycle:
1.
Insert the silicon disk into the
portafilter.
2.
Place the cleaning tablet on the
silicon disk (position in the centre).
3.
Insert the portafilter into the group
head and rotate to right to lock in
position.
4.
Ensure Power On/Off button is on.
5.
Turn the dial to the ‘Espresso’
position for 20 seconds.
6.
Turn the dial back to the ‘Standby’
position.
7.
Repeat steps 5-6 three times or until
the cleaning tablet is dissolved.
INSTALLING/REPLACING ThE
FILTER IN ThE WATER TANK
Rinse filter & mesh Soak the water filter for
5 minutes
1 2
Assemble
3
Insert & lock water tank Install filter in water tank
5
Set date 2 months ahead
4 6
REPLACEMENT DUE
BES810BSS_ANZ_IB_E14.indd 23 27/06/2014 5:26 pm