Breville BBL820, Instruction Book

Page: 4 / 16

4
SAFEGUARDS
FOR YOUR
BLENDER
• Wash the blender jug with
warm soapy water before
first use.
• Use only the blender jug
and lid that is supplied
with this blender. The use
of attachments, including
canning jars or accessories not
manufactured or specified by
Breville may cause the risk of
fire, electrical shock, or injury.
• Always ensure the blender
is assembled properly
before using. Lid must be
firmly secured to the jug
before operation to ensure
internal contents do not
escape, spray or overflow.
• Always ensure the appliance
is properly assembled as per
instruction before use. Using
the appliance without being
properly assembled may cause
product malfunction, product
damage or pose safety risk
including personal injury.
• If the motor is straining under
a heavy load, do not operate
continuously for more than
10 seconds. Allow the motor
to rest for 1 minute between
uses on heavy loads. Note
that none of the recipes
in these instructions are
considered a heavy load.
• Do not leave the blender
unattended when in use.
• Flashing light indicates ready
to operate. Avoid any contact
with blades or moving parts.
• Keep hands, fingers, hair
and clothing away from the
blender during use. Always
turn blender off and unplug at
the wall before reaching inside.
• Be careful when handling the
blender jug as the blades are
very sharp. Be careful when
emptying the jug and during
cleaning. Mishandling of the
blades may cause injury.
• Do not remove the jug
from the motor base
while blender is in use.
• The blender is intended for
food or drinks preparation.
Do not use for anything
other than food or drinks.
Do not operate without any
ingredients in the blender jug.
• Never attempt to operate
with damaged blades, or
with utensils, or any foreign
objects inside the blender jug.
• To reduce the risk of severe
injury to persons or damage