background image

26

Priming machine for descaling function

2.  Dissolve one Breville Descaling powder 

sachet into one litre of water then fill the 

water tank. 

3.  Press and hold the 2-CUP button and 

then press and hold the POWER button 

simultaneously to enter the Descale mode. 

The unit will heat up as part of commencing 

the descaling action, during the heating 

processes the POWER button should flash 

continuously. The machine will indicate it 

is ready for descaling when the POWER 

button, 1 CUP button, CLEAN/DESCALE 

indicator and HOT WATER/ STEAM 

indicator are all illuminated (solid on).

Descaling the coffee component

4.  Press the 1-CUP button to start the 

descaling for the coffee component of the 

machine. Descaling coffee component 

takes approximately 25 seconds. The 1 

CUP button should flash continuously and 

remain constant once the descaling process 

has finished. To terminate the descaling 

within 25 seconds, press the 1 CUP button 

again.

Descale the Steam and hot water components

Descaling steam and hot water takes 

approximately 13 seconds and 8 seconds 

respectively. Descaling can be terminated 

prematurely by turning the steam dial to 

STANDBY.
5.  Descale Steam component by turning the 

steam dial RIGHT towards the   icon. 

6.  Descale Hot water component by turning 

the steam dial to the LEFT towards the 

 icon.  

Repeat processes to complete descaling

After the above processes about half (0.5 litre) 

of the descale solution should be left in the 

water tank.
7.  Repeat steps 4-6 above to complete the 

descaling process to empty the solution in 

the tank.  

Descaling Solution Rinse

8.  After descaling, remove the water tank and 

rinse thoroughly then refill with fresh cold 

water to the maximum capacity (2 litres)

and repeat steps 4-6 to further cleanse the 

machine of any residue of the cleaning 

solution thoroughly.

9.  Press ‘POWER’ to quit the descaling 

process. This will be indicated by the LED 

lights switching off.

NOTE

The machine turns off automatically if there is 

no action for 5 minutes in descaling mode. To 

resume descaling, please start from step 3.

Summary of Contents for Barista Express BES870BSS





































Reviews: