8
9
operating your Breville Avance
®
2 litre Cordfree kettle
continued
Care, cleaning and storage
Safety Boil dry protection
The kettle is fitted with a safety device, which
protects against overheating should the appliance
be operated with insufficient water. If this occurs
the kettle will stop heating, switch off at the power
outlet and allow the kettle to cool. Remove from
the power base and add cold water. Return kettle
to the power base. The safety device will then
automatically reset when the kettle has cooled
down.
For additional safety your kettle is fitted with
an additional thermal cut out. In the event of
overheating, the kettle will automatically shut
down to prevent further damage. Should this
occur, take your kettle to an authorised Breville
Service Centre.
Always switch off at the power outlet and unplug
the appliance from the power outlet before
cleaning.
removABle fIlter
The kettle features a removable mesh filter to
remove scale deposits for cleaner water. To clean
the scale deposits from the filter, open the lid and
remove the filter by sliding the filter up and out of
the kettle.
The filter can be cleaned by placing under running
hot water and rubbing with a cleaning cloth or
brush.
To replace filter, simply slide the filter down into
the slot behind the spout of the kettle and push
down into position.
The filter could become damaged with time, please
check regularly and replace if found damaged.
The concealed element in the base of the kettle is
made from high quality stainless steel. Any brown
stains appearing are the result of mineral deposits
and are not rust.
removAl of mINerAl depoSItS
Mineral deposits in tap water may cause the
kettle interior and water window to discolour over
time. Stains and scales may be removed by using
the Breville Kettle Cleaner, available from most
leading electrical retailers.
BrevIlle kettle CleANer
directions for use:
Add 25ml of Breville Kettle Cleaner to 2 litres
of water.
Fill kettle with mixture on a protected surface.
Bring kettle to boil and let stand for 30
minutes.
Clean spout by using a cloth dampened with
Breville Kettle Cleaner, rub well. Then wipe off.
Bring the kettle to boil for a second time, then
empty solution.
Fill kettle with fresh water and bring to the
boil, discard boiled water. Now your kettle is
ready to make your next cup of tea/coffee.
For best results we recommend you use the
Breville Kettle Cleaner. Alternatively, stains may be
removed by:
Filling the kettle until
2
⁄
3
full with part white
vinegar and 2 parts water. Boil and allow to
stand over night.
Emptying the solution from the kettle. Fill the
kettle with clean water, bring to the boil and
discard the water. Repeat and the kettle will
be ready for use.
.
2.
3.
4.
5.
6.
.
2.
