10
using your meat grinder
WARNING Always make sure the appliance is switched off and unplugged from the
mains supply socket before assembling or disassembling.
Ensure that your meat grinder has been assembled correctly and check that the on/off
reverse switch is in the
off
position. Plug your meat grinder in to the mains supply socket.
If necessary, cut the food into pieces that will fit easily into the feed head and place it onto the
feed tray. Make sure that meat does not contain any bones.
Place a suitable container under the grinder to catch the minced food.
Switch on the grinder by setting the switch to the
on
position.
Use the food pusher to gently push the food into the feed tube.
Never feed food into the appliance by hand. ALWAYS use the food pusher.
important notes
When your meat grinder is operated for the first time, there may be a slight burning odour.
This represents no danger to the user and does not indicate a defect in your meat grinder.
The odour will soon disappear.
The grinder must ALWAYS be switched on before adding food.
If the motor slows or stops, this may be due to jammed food. Immediately switch the grinder
off, then set the switch to the
reverse
position to push the food in the opposite direction.
If this does not cure the problem, switch off the grinder and disconnect it from the mains
supply. Disassemble the grinding head and clean the internal parts.
1.
.
.
.
.
•
•
•
•
