background image

4

REAd ALL INSTRUCTIONS 

BEFORE USE ANd SAVE FOR 

FUTURE REFERENCE

• 

Carefully read all instructions before 

operating and save for future reference.

• 

Before use fully unwind the power cord.

• 

Always use the Citrus Press on a dry,  

level surface.

• 

Remove any promotional stickers before 

using the Citrus Press.

• 

Always make sure the Citrus Press is 

properly assembled before connecting 

the plug and switching on at the power 

outlet and switching ON the ON/OFF 

button on the appliance. The appliance 

will not operate unless properly 

assembled.

• 

Always switch the appliance OFF at the 

ON/OFF button, then switch off at the 

power outlet and remove the plug if the 

appliance is left unattended, if not in 

use, if moved or dismantled for cleaning 

and when storing.

• 

Do not let the cord hang over the edge  

of a table or counter, touch hot surfaces,  

or become knotted.

• 

Do not place this appliance on or near 

a hot gas or electric burner, or where it 

could touch a heated oven.

• 

Do not leave the appliance unattended 

when in use. 

• 

Use caution when operating the 

appliance – do not place hands or fingers 

near moving or rotating parts.

• 

Avoid placing hands or fingers near 

Juicing Press Arm mechanism at rear of 

Motor Base when moving Juicing Press 

Arm into the upright position.

BREVILLE RECOMMENdS SAFETy FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with 

the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise 
a degree of care when using any electrical appliance and adhere to the following precautions.

• 

This appliance is not intended for use 

by young children or infirm persons 

without supervision.

• 

Young children should be supervised to 

ensure that they do not play with  

the appliance.

• 

Do not immerse power cord or motor 

base in water or any other liquid.

• 

The installation of a residual current 

device (safety switch) is recommended 

to provide additional safety protection 

when using electrical appliances. It 

is advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See your electrician for 

professional advice.

• 

Any maintenance other than cleaning 

should be performed at an authorised 

Breville Service Centre.

• 

Strictly follow cleaning and  

care instructions.

• 

Regularly inspect the supply cord, plug 

and actual appliance for any damage. If 

found damaged in anyway, immediately 

cease use of the appliance and return 

the entire appliance to the nearest 

authorised Breville service centre for 

examination, replacement or repair.

IMPORTANT SAFEGUARdS

Summary of Contents for 800CP

























Reviews: