13 / 40
4. Press the SET button for approx. 3 seconds to confirm
the selected time deviation.
13 Alarm setting
NOTICE! The alarm setting cannot be made when the time
signal search is active (the corresponding symbol flashes).
Wait until the time signal search is completed to set the
manual alarm.
1. Press the SET button to display the alarm time (ALM).
2. Press the SET button for about 3 seconds to enter the
alarm time settings mode.
3. Digits to be set are flashing.
4. Press UP or DOWN button to change the value.
5. Press the SET button to confirm and switch to the next
setting.
6. Settings sequence: Hours > Minutes
7. Finally, press the SET button to save the settings and
exit settings mode.
Enable/disable the alarm
8. In normal display mode, press the SET button to display
the currently set alarm time. The alarm time and the
alarm status (ALM/OFF) are displayed.
9. Press the UP or DOWN button to enable the alarm
(ALM). The symbol is displayed on the LCD.
10. Press the UP or DOWN button to disable the alarm. The
symbol is no longer displayed.
