11 / 40
1. After switching on, press the PRESSURE button for 3
seconds. The weather symbol on the display flashes.
2. Select the graphic symbol corresponding with the cur-
rent weather status by pressing the UP or DOWN but-
ton.
3. Press PRESSURE button to switch to the next setting.
The temperature unit indicators flash.
4. Select the desired temperature unit (°C or °F) by press-
ing the UP or DOWN button.
5. Press PRESSURE button to switch to the next setting.
The air pressure unit indicator flashes.
6. Select the desired air pressure unit (inHg or mbh Pa) by
pressing the UP or DOWN button.
7. Press PRESSURE button to switch to the next setting.
The air pressure value indicator flashes.
8. Set the current value for the air pressure above N.N. by
pressing the UP or DOWNbutton.
9. Finally, press the PRESSURE button to save the settings
and return to the normal display mode.
10 Automatic time setting
After the power has been restored, the unit automatically
searches for the radio signal. It takes approximately 3-8
minutes for this process to be completed.
If the radio signal is received correctly, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:
1. Press the DOWN button for approx. 2 seconds to initi-
ate the reception of the radio signal again.
2. Press the DOWN button once again for approx. 2
seconds to stop the reception of the radio signal.
