Bresser Tendence 70-01100, Instruction Manual

Page: 37 / 132

GB/IE
37
A. WEATHER/ PRESSURE window
B. TEMPERATURE/ HUMIDITY window
C. CLOCK window
D. DOWN (
▼
) window
• Select the next available mode
• Press and hold for 2 seconds to search for wireless signal from
remote sensor.
• Decrease parameters.
E. ALARM window
• When time mode has been selected, press once to display the alarm
time of weekday alarm (W), single alarm (S) and pre-alarm (Pre-AL).
• Hold for 2 seconds, set weekday, single or pre-alarm’s alarm time.
• When temperature mode has been selected, press once to display
the highest or lowest temperature alarm’s value.
• Hold for 2 seconds, set the highest or lowest temperature alarm’s
value.
• When alarm is on, press once to stop the alarm temporarily.
F. CHANNEL button
• Press to display the outdoor temperature readings of Channels 1, 2
and 3. (additional remote sensors are required)
• Hold for 2 seconds, enter into the circulation mode and outdoor tem-
perature readings of Channels 1, 2 and 3 will be displayed automati-
cally in every 5 seconds.
G. MODE button
• When pressure mode has been selected, press once to display the
local pressure, altitude and sea level.
• Press and hold for 2 seconds to set altitude and sea level.
• When time mode has been selected, press once to toggle between
time with seconds display or time with weekday display.
• Press and hold for 2 seconds, set language of the day of the week,
year digit, month digit, date digit, hour format (12/ 24 hours), hour
digit and minute digit. (Note: calendar format is default in month-date
display)