Bresser Tendence 70-01100, Instruction Manual

Page: 47 / 132

GB/IE
47
• If the time signal has not been received in 8 minutes, you may set the
time manually.
MANUAL SETTINGS
To select the time mode, press UP (
▲
) or DOWN (
▼
) until the IN icon
fl ashing with a beep sound alert.
TIME AND CALENDER
• Press and hold MODE button until the day of week language abbre-
viation “ENG” will fl ash
• Press the UP (
▲
) or DOWN (
▼
) selecting the day of the week in
English, German, French, Italian, Spanish, Dutch or Swedish.
• After the language of weekday is set, press MODE button to confi rm
and move to the next parameter (year)
• Continue setting the year, month, day, time format (12 or 24 hours),
local hour and minutes, using the same technique
• After programming is complete the display will return to the default
hour and minutes with seconds display.
CLOCK ALARMS
There are two time alarms – Weekday alarm (W) and Single day alarm
(S) - and one Ice Warning Alarm (PRE-AL) .
• If Weekday (W) alarm is activated, it will sound at the set time and
the alarm icon will fl ash Mondays through Fridays
• If Single (S) day alarm is activated, it will sound at the set time and
the alarm icon will fl ash only for this specifi c day and will not activate
on subsequent days
• If Ice Warning Alarm ( PRE-AL) is activated, in will sound at the set
time and alarm icon will fl ash once the remote temperature for Chan-
nel One (1) will reach 32°F(0°C) and below
NOTE: Ice Warning Alarm can be set only if one or both - Week-
day or Single alarm - are programmed.