21
DE
GB
FR
NL
ES
IT
Outdoor sensors (Fig. 2/ Fig. 3)
LED-operation display
(Fig. 2, 10/ Fig. 3, 15)
Flashes when transmitting information at the
weather station.
Switch for channel selection
(Fig. 2, 14/ Fig. 3, 19)
Slide the switch to position 1, 2 or 3.
RESET button (Fig. 2, 13/ Fig. 3, 18)
Press the button with a thin metal rod in the
event of a malfunction for resetting the device
settings.
Wall mounting assembly
(Fig. 2, 11/ Fig. 3, 17)
For mounting of the sensor to a suitable wall
hook.
Settings and displays
Automatic setting of the time and date.
Display of the signal strength
The signal strength indication is organized
into 4 levels. If the symbol
flashes, the
time signal is received. The strength of the
received signal can be subdivided into 4
categories:
No signal
Weak signal
Adequate signal
Good signal
If the time signal is received successfully,
the time synchronization symbol appears
permanently on the display
.
Otherwise, the symbol is no longer
displayed.
Pay attention:
By pressing the RCC
button (Fig. 1, 8) you can also start the
synchronization of the time signal manually.
This reception mode automatically turns
off after 6-15 minutes. In this way, you can
expect a much higher power consumption,
which will shorten the life of the batteries.
ANL700X40XMSP1215BRESSER.indd 21
14.12.15 13:23
