Bresser TemeoTrend Colour, Instruction Manual

Page: 29 / 36

29
GB
3. Press the DOWN or UP button to change this setting.
4. Press the ALARM button to confirm and go to the next
setting.
5. The setting order is hour >> minute >> ON/OFF (Enable/
disable alarm) >> save and exit.
6. Press ALARM again to confirm and exit setting mode.
NoTE:
The alarm will be activated automatically if an alarm time is
set. The corresponding symbol will appear on the display.
The alarm sounds for a total of 2 minutes and will change
characteristics during that time.
For more information also read ‘Snooze function’.
Disable the alarm
1. To disable the alarm, first enter to the required alarm time
mode (
or ) by pressing the ALARM button (9).
2. Press the DOWN button (13) to select ‘OFF’.
3. Confirm the settings by prerssing the ALARM button until
the current date appears on the display again.
Enable the alarm
1. To enable the alarm without changing the alarm time,
first enter to the required alarm time mode (
or ) by
pressing the ALARM button (9).
2. Press the UP button (12) to enable the alarm for the pre-
viously set alarm time.
3. Confirm the settings by prerssing the ALARM button until
the current date appears on the display again.
Snooze function
1. When alarm is ringing, you can press the SNOOZE/
LIGHT button (8) to silence it for 5 minutes. The icon will
now flash as well.
2. Press the ALARM button to turn off the alarm. The alarm
will activate again after 24 hours at the set time.