10
MOUNTING KIT INSTALLATION
1. Pole mounting stand x 1 2. Mounting clamp x 1 3. Plastic pole x 1
4. screws x 4
5. Hex nuts x 4
6. Flat washers x 4
7. screw x 1
8. Hex nut x 1
Note:
Plastic pole placed under
the egg tray, please
check before disposal of
the packaging.
PLASTIC MOUNTING INSTALLATION
1. Fasten the plastic pole onto your fix pole with mounting base, clamp, washers,
screws and nuts. Following below 1a, 1b, 1c sequences:
1a. Insert the plastic pole into the hole of the mounting
stand, and then secure it with the screw and nut.
1c. Fasten the mounting stand
and clamp together onto a fix
pole with 4 long screws and nuts.
1b. Apply 2 rubber pads on the mounting clamp.
Summary of Contents for 7802541
Page 74: ......
